Wallpaper adhesive for seamless wallcovering

Professional ready-to-use adhesive for seamless wallpaper / PVC wallpaper.
Consumption: Approximately 1 liter per 4 to 7 m2. This also depends on the type of wallpaper and the substrate.

Packaging:

- Bucket 5 kg = 5 L
- Bucket 10 = 10 L

Don't forget to order your Behang Toolbox ?

(Price excluding VAT) €40,50

€49,00

ADHESIVE FOR PVC WALLPAPER

PROPERTIES
- Ready for use
- Solvent free
- Super strong - Odourless
- Spreads easily - Non-flammable
- Lump-free

CONSUMPTION
- 5 kg bucket: about 1 liter per 4 to 7 m2. This also depends on the type of wallpaper and the substrate.

PROCESSING
- Stir well before use.
- Non-thinnable.
- Apply adhesive directly to the wall with a coat roller or block brush.
- Make sure there is enough glue on the substrate.
- Press the seams well.
- Opening time is about 20 minutes, depending on ambient temperature and humidity.
- Drying time is 2-4 hours.
- Remove any adhesive residue immediately with clean water and allow to dry.

SUBSTRATE
The substrate must be clean, dry, and free of dust and grease.
Ensure that the substrate is solid enough.
Remove old wallpaper.
Walls finished with latex should first be cleaned and degreased.
Highly absorbent substrates should be pre-treated with a primer.